MAX POWER AT ENGINE CRANKSHAFT : 90 hp at 2,200 engine rpm.
MAX POWER AT PTO SHAFT (kW): 85 hp, rpm at 2,200 engine rpm.
MAX DRAWBAR PULL: 41.4 kN at 4.0 km/h.
ENGINE: John Deere diesel, Cylinders = 6, Bore = 102 mm, Stroke = 110 mm, displacement = 5,390 cc, Compression ratio = 16.7:1.
TRANSMISSION: Type Constant mesh, 12F 4R
STANDARD SPEEDS: Forward = 2.7 to 32.0 km/h, Reverse = 5.0 to 22.6 km/h on 23.1 x 30 rear tyres
STANDARD TYRES: Front = 9.00 x 16 X 8, Rear = 23.1 x 30 x 8.
TURNING RADIUS: 4.47 m, Ground clearance = 489 mm.
OVERALL DIMENSIONS: Length = 4,399 mm, Width = 2,416 mm, Height = 2,644 mm, Tread, Front = 1,626 mm, Rear = 1,829 mm, Wheelbase = 2,597 mm.
WEIGHT: (as sold without ballast): 6,234 kg.
PTO: Standard speed = 540: Engine rpm at standard pto speed = 1,970, Spline shaft diameter = 35 mm, Height above ground on standard tyres = 734 mm, End of shaft = 355 mm ahead of drawbar pin.
HYDRAULICS: Reservoir capacity 22.7 L, Pump capacity = 878 ml/s, Max pressure = 155 MPa, Number remote outlets = 2.
IMPLEMENT ATTACHMENT: Drawbar and 3 point linkage, Category 2 linkage
ROPS CAB OR ROLLBAR: Rops cab
ADDITIONAL EQUIPMENT AVAILABLE: 3 pt linkage, Dual drive wheels = 18.4 x 34
