OFFICIAL TEST NO.: Not yet tested (manufacturer’s figures).
HORSEPOWER: Max Belt = 77, Max Drawbar = 70.
MAX DRAWBAR PULL: 8,400lb at 3.1 mph on dual 13.50 x 32 tires.
ENGINE: Type-vertical in-line, 2-stroke diesel, inlet port, overhead exhaust valves, 3 cylinder, Bore = 4.250in., Stroke = 5.000in., compression ratio = 16:1, rated speed = 1,200 to 1,500 rpm.
STANDARD TIRES: Front = 8.25 x 20, Rear = 13.50 x 32 duals, 18 x 26 singles.
STANDARD SPEEDS (with standard tires): Forward = 3.125, 4.0, 4.75, 5.375, 6.5, 7.75, 10.75, 15.625, 18.75 mph, Reverse = 3.125, 5.375, 12.75 mph at 1,500 engine rpm.
TURNING RADIUS: 17ft. 6in., ground clearance = 12-3/8in.
OVERALL DIMENSIONS: Height (to top of radiator) = 66-3/8in., Width = 104in., Length = 140in., Wheelbase = 83in.
WEIGHT: 11,000 lb with dual tires, fuel, oil, water ballast.
BELT PULLEY: Diameter = 13 in., Width 7in., speeds = 810 rpm at 1,200 engine rpm.
PTO- 1-3/8in. spline shaft, 540rpm at 1,200 engine rpm. Height above ground level with standard tires = 33-7/8in. End of shaft 18in. ahead of drawbar pin. Shaft 2in. right of centre. Direction of rotation-clockwise, viewed from rear.
ELECTRICAL SYSTEM: 12 volts.
HYDRAULIC SYSTEM: Working pressure-1,000 psi, pump capacity = 7.7 gpm.
IMPLEMENT MOUNTING: Trailing.
