SE3000/SE3040

2WD

MAX POWER AT ENGINE CRANKSHAFT (kW): 22 (30 hp) at 2,800 engine r/min.

MAX POWER AT PTO SHAFT (kW): 19.5 (26.5 hp) at 588 r/min at 2,800 engine r/min.

MAX. CRANKSHAFT TORQUE (Nm): 82 at 1,800 engine r/min.

ENGINE: IHI Shibaura LEM853, Rated at 2,800 r/min, Cylinders =3 Bore = 85 mm, Stroke = 84 mm, Displacement = 1.429 l, Compression ratio = 21.1:1, Operating speed range = 1,400/2800 r/min, Fuel tank capacity = 29 l.

TRANSMISSION: Type, Sliding gear.

STANDARD SPEEDS: Forward = 1.24, 1.7, 2.1, 2.9, 3.9, 4.8, 8.3, 8.6, 10.8, 12.7, 17.2, 21.58 km/h, Reverse = 1.4, 3.3, 7.4, 14.83 km/h on 12.4 x 24 rear tires.

BRAKES: Mechanical, Type = shoe.

STANDARD TIRES: Front = 5.00 x 15, Rear = 12.4 x 24.

TURNING RADIUS: With brakes = 2.4 m, Without brakes = 26 m.

GROUND CLEARANCE: 385 mm.

OVERALL DIMENSIONS: Length = 3,020 mm, Width = 1,580 mm, Height to highest point 0f steering wheel = 1,520 mm, Tread, Front (min/max) = 1,105 mm/ 1,460 mm, Rear = 1,160 mm/ 1,550 mm.

MASS (weight as sold without ballast): 1,165 kg, Max permissible = 2,860 kg.

PTO: Standard speeds = 588/ 747/ 984/ 1,490 r/min, Engine speed at standard pto

speeds = 2,800 r/min.

PTO: Power at standard pto speed = 19.5 kW, Spline shaft diameter = 35 mm, Height above ground on standard tires = 571 mm.

HYDRAULICS: Reservoir capacity = 24l, Pump capacity = 373 ml/sec (4.9 gpm), Max pressure = 15 MPa (2,133 psi), Number of remote outlets = 1, Open centre.

IMPLEMENT ATTACHMENT: 3 point linkage, Category = 1, Max lift at hitch point = 1,100 kg.

APRROVED CAB OR ROPS ROLLBAR: Rollbar, Official noise rating = 96 dBA without cab.

STANDARD EQUIPMENT: Vertical muffler, Selective gear system with 12 forward

and four reverse speeds, Dual clutch and live pto, Hydraulic position and draft control, 3 pt linkage, 12 volt electrical system, Headlights, Tail lights and direction indicators

OPTIONS AVAILABLE: Swinging drawbar, Front end and rear wheel weights, Safety frame, Remote control valve, Breakaway coupling kit.

4WD

MAX POWER AT ENGINE CRANKSHAFT (kW): 22 (30 hp) at 2,800 engine r/min.

MAX POWER AT PTO SHAFT (kW): 195 (26.5 hp) 568 r/min at 2,800 engine r/min.

MAX CRANKSHAFT TORQUE (Nm): 82 at 1,800 engine r/min.

ENGINE: IHI Shibaura LEM853, Rated at 2,800 r/min, Cylinders = 3, Bore = 85 mm, Stroke = 84 mm, Displacement = 1.429 L, Compression ratio = 21.1.1, Operating speed range = 1,400/ 2,800 r/min, Fuel tank capacity = 29 l.

TRANSMISSION: Type = Sliding gear.

STANDARD SPEEDS: Forward = 1.24, 1.7, 2.1, 2.9, 3.9, 4.8, 6.3, 8.6, 10.8, 12.7, 17.2, 21.58 km/h, Reverse = 1.4, 33, 7.4, 14.83 km/h on 12.4 x 24 rear tires.

BRAKES: Mechanical, Type = shoe.

STANDARD TIRES: Front = 6.00 x 16, Rear = 12.4 x 24.

TURNING RADIUS: With brakes = 2.5 m, Without brakes = 2.9m.

GROUND CLEARANCE: 350 mm.

OVERALL DIMENSIONS: Length = 3,020 mm, Width = 1,580 mm, Height to highest point of steering wheel = 1,520 mm, Tread, Front (min/max) 1,130 mm fixed, Rear = 1,160 mm/ 1,550 mm.

MASS (weight as sold without ballast): 1,165 kg, Max permissible = 2,850 kg

PTO: Standard speeds = 588/ 747/ 984/ 1,490 r/min, Engine speed at standard PTO speeds = 2,800 r/min, Power at standard PTO speed = 19.5 kW, Spline shaft diameter = 35 mm, Height above ground on standard tires = 571 mm.

HYDRAULICS: Reservoir capacity = 24 l, Pump capacity = 373 ml/sec (4.9 gpm), Max pressure = 15 MPa (2,133 psi), Number of remote outlets = 1 , Open centre.

IMPLEMENT ATTACHMENT: 3 point linkage, Category 1, Max lift at hitch point = 1,100 kg.

APPROVED CAB OR ROPS ROLLBAR: Rollbar, Official noise rating = 96 dBA without cab.

STANDARD EQUIPMENT: Vertical muffler, Selective gear system with 12 forward and 4 reverse speeds, Dual clutch and live PTO, Hydraulic position and draft control, 3 pt linkage, 12 volt electrical system, Headlights, Tall lights and direction indicators.

OPTIONS AVAILABLE: Swinging drawbar, Front end and rear wheel weights, Safety frame, Remote control valve, Breakaway coupling kit.

search previous next tag category expand menu location phone mail time cart zoom edit close