2WD
MAX POWER AT ENGINE CRANKSHAFT (kW): 62 (83 hp) at 2,200 engine r/min.
MAX POWER AT PTO SHAFT (kW): 53 (72 hp) at 540 r/min, At 2,200 engine r/min.
MAX POWER AT DRAWBAR (kW): 47.7 (63.9 hp) at 2,200 engine r/min.
MAX CRANKSHAFT TORQUE (Nm): 275 at 1,500 engine r/min.
MAX DRAWBAR PULL (kN): 32.0 on 18.4 x 30 tires when tractor weighted to 4,841 kg.
ENGINE: IHI Shibaura LER 1104, Rated at 2,200 r/min, Cylinders = 4, Bore = 110 mm, Stroke = 120 mm, Displacement = 4.561 l, Compression ratio = 17:1.1, Operating speed range = 1,500 to 2,200 r/min, Fuel tank capacity = 100 l.
TRANSMISSION: Type = Constant mesh.
STANDARD SPEEDS: Forward = 0.33, 0.49, 0.66, 0.81,1.31, 1.95, 2.6, 3.23, 4.14, 6.11, 6.19, 10.15, 11.96,17.69, 23.69, 29.27km/h, Reverse = 0.5, 1.98, 6.22, 17.98 km/h on 18.4 x 30 rear tires.
BRAKES: Mechanical, Type = wet multi disc.
STANDARD TIRES: Front = 7.50 x 20, Rear = 18.4 x 30.
TURNING RADIUS: With brakes = 3.1 m, Without brakes = 3.6 m.
GROUND CLEARANCE: 425 mm.
OVERALL DIMENSIONS: Length = 3,910 mm, Width = 1,890 mm, Height to highest point of steering wheel = 1,790 mm, Tread, Front (min/max) = 1,300 mm/ 1,600 mm, Rear = 1,445 mm/ 1,945 mm.
MASS (weight as sold without ballast): 3,305 kg, Max permissible = 7,700 kg.
PTO: Standard speeds = 540/ 800/ 1,000 r/min, Engine speed at standard pto speeds = 2,200 r/min.
PTO: Power at standard pto speed = 53 kW, Spline shaft diameter = 35 mm.
HYDRAULICS: Reservoir capacity = 25L, pump capacity = 586 ml/sec (7.8 gpm), max pressure = 20 MPa (2,900 psi), Number of remote outlets = 1, Open centre.
IMPLEMENT ATTACHMENT: 3 point linkage, Category = 2, Max lift at hitch point = 2,500 kg.
APPROVED CAB OR ROPS ROLLBAR: Cab (option), official noise rating = 94 dBA without cab.
STANDARD EQUIPMENT: Vertical muffler, Constant mesh gear system with 16 forward and 4 reverse speeds, Single dry plate clutch, Hydraulic draft position and mixed control, Independent pto, Three-point linkage cat. 2, Hydrostatic steering, Single acting auxiliary hydraulic valve, Swinging drawbar safety frame, Adjustable suspension seat.
OPTIONS AVAILABLE: Gason cab, Front end and rear wheel weights, 2nd and 3rd remote control valve, Roller drawbar, Front end weight frame.
4WD
MAX POWER AT ENGINE CRANKSHAFT (kW): 62 (83 hp) at 2,200 engine r/min.
MAX POWER AT PTO SHAFT (kW): 53 (72 hp) at 540 r/min at 2,200 engine r/min.
MAX POWER AT DRAWBAR (kW): 47.7 (63.9 hp) 2,200 engine r/min.
MAX CRANKSHAFT TORQUE (Nm): 275 at 1,500 engine r/min.
MAX DRAWBAR PULL (kN): 32.0 on 18.4 x 30 tires when tractor weighted to 8,841 kg.
ENGINE: IHI Shibaura LEA 1104 rated at 2,200 r/min, Cylinders: 4, Bore = 110 mm, Stroke = 120 mm, Displacement = 4.561 l, Compression ratio = 17.1:1, Operating speed range = 1,500 – 2,200 r/min, Fuel tank capacity = 100 l.
TRANSMISSION: Type = Constant mesh.
TRANSMISSION SPEEDS: Forward = 0.33, 0.49, 0.66, 0.81, 1.31, 1.95, 2.6, 3.23, 4.14, 6.11, 8.19, 10.15, 11,96, 17.69, 23.69, 29.37 km/h, Reverse = 0.5, 1.98, 6.22, 17.98 km/h on 18.4 x 30 rear tires.
BRAKES: Mechanical, Type = wet multi disc.
STANDARD TIRES: Front = 11.2 x 24, Rear = 18.4 x 30.
TURNING RADIUS: With brakes = 3.6 m, Without brakes = 4.3 m.
GROUND CLEARANCE: 395 mm.
OVERALL DIMENSIONS: Length = 3,910 mm, Width = 1,890 mm, Height to highest point of steering wheel = 1,790 mm, Tread, Front (max/min)= 1,820 mm/ 1,450 mm, Rear = 1,445 mm, 1,945 mm.
MASS (weight as sold without ballast): 3540 kg, Max permissible = 7,300 kg.
PTO: Standard speeds = 540/ 800/ 1,000 r/min, Engine speed at standard pto speeds= 2,200 r/min. Power at standard pto speed = 53 KW, Spline shaft diameter = 35 mm.
HYDRAULICS: Reservoir capacity = 25 l, Pump capacity = 586 ml/sec (7.8 gpm), Max pressure = 20 MPa (2,900 psi), Number of remote outlets = 1 , Open centre.
IMPLEMENT ATTACHMENT: 3 point linkage, Category 2, Max lift at hitch point = 2,500 kg.
APPROVED CAB OR ROPS ROLLBAR: Cab (option), Official noise rating = 94 dBA without cab.
STANDARD EQUIPMENT: Vertical muffler, Constant mesh gear system with 16 forward and 4 reverse speeds, Single dry plate clutch, Hydraulic draft position and mixed control, Independent PTO, 3 point linkage cat 2, Hydrostatic steering, Single acting auxiliary hydraulic valve, Swinging drawbar, Safety frame, Adjustable suspension seat.
OPTIONS AVAILABLE: Gason cab, Front end and rear wheel weights, 2nd and 3rd remote control valve, Roller drawbar, Front end weight frame.